ATEX Certified
Zone 1
IECEX Certified

LinkEx LED Floodlite

ATEX LED Floodlite

Key Features

  • ATEX Directive compliant and IECEx Scheme certified
  • For use in Zones 1 & 2 Gas and Dust atmospheres
  • Ultra bright high power LED light output
  • Medium or wide angle flood beams
  • Wide voltage range 24V- 254V
  • Small, lightweight floodlamp construction
  • IP66/67 dust and watertight
  • Supplied with stand and integral bridle
  • Available with magnet mounting and tripod options
  • Low operating surface temperature, no risk of burns
  • Very low maintenance
  • Lens protecting films available for blasting and painting applications

The WF-300 Wolf ATEX LED Floodlite is a high performance, lightweight, portable floodlight for use in temporary applications and installations in potentially explosive atmospheres. Using an array of high output, high efficiency LEDs, it gives an excellent flood of brilliant white light.

The LED Floodlite is CE marked to the ATEX Directive and IECEx Certified, for safe use in Zone 1 potentially explosive gas and Zone 21 explosive dust atmospheres, where a T4 temperature class permits.

Delivering an impressive flood of brilliant white light from an array of 48 high power LEDs, the WF-300 LED Floodlite has an output of 3,300 lumens, equivalent to a 200w halogen incandescent lamp, but because of the far greater efficiency, it has significantly lower power consumption at 58 watts. One benefit of this is that the unit runs at a much lower temperature, eliminating the risk of burns when handling.

The WF-300 range of lamps is supplied with collimating optics delivering a piercing 30° ‘medium’ flood of light for maximum versatility in hazardous area activities. A version delivering a wide angle flood beam is available to special order. LED light sources have an inherently greater robustness than comparatively fragile filament lamps, the LEDs fitted to this floodlight have an estimated life of up to 100,000 hours, therefore the ATEX LED Floodlite is a very low maintenance, highly reliable unit.

The WF-300 LED Floodlite is cable powered, and can be run with voltages of 100 to 254V AC or 24 AC/DC. Lamps are supplied with 10 metres of SY cable as standard, fitted with an ATEX plug to suit intended supply voltage (110V, 230V or 24V). For mains voltages a lamp fitted with an ATEX socket is available allowing quick and easy setup of multiple LED Floodlites.

The LED Floodlite has a robust marine grade aluminium alloy enclosure with corrosion resisting epoxy powder coating, designed to withstand the rigours of harsh industrial and offshore applications; the lens is an impact-resistant polycarbonate transparent cover which is replaceable, however, in blasting and painting applications it can be protected from damage using a disposable anti-static lens film. The lamp is sealed dust tight and protected from water immersion with a certified IP66/67 enclosure.

The Wolf LED Floodlite is a lightweight and compact unit, ideal for use in portable and temporary applications. It is supplied with a stainless steel bridle with pivot angle adjustment, bolted to a stainless steel lamp stand for additional protection. The lamp and bridle can easily be detached and bolted to various additional accessories available from Wolf, including magnet fixings and a tripod stand, making this a truly versatile lighting solution for temporary lighting installations and activities in hazardous areas.

Light Output

mobile_low_res_LinkEx_LED_Floodlite_FloodMedium Flood (30°) (as per Light Output Diagram)
Light intensity at 2m 2870 lux, 5m 459 lux

Wide Flood (50°)


Product Dimensions


Product referenceWF-300
Product descriptionLinkEx™ LED Floodlite
Voltage18-54V AC/DC100-254V AC
CodeII 2 GD Ex emb IIC T4 Gb
Ex t IIIC T87°C Db IP66/67
(Ta = -20°C to +55°C)
II 2 GD Ex emb IIC T4 Gb
Ex t IIIC T103°C Db IP66/67
(Ta = -20°C to +50°C)
Equipment Category2GD
Type of protection"e" increased safety, 'mb' encapsulation,
't' enclosure protection
Area of classification (Gases)Zones 1 and 2,
Gas Groups IIA, IIB and IIC
Temp. classificationT4
Area of Classification (Dusts)Zones 21 and 22,
Dust Groups IIIA, IIIB and IIIC
Max surface temp (Dusts)T87°CT103°C
Ambient temperature-20°C to +55°C-20°C to +50°C
EnclosureMarine grade aluminium alloy,
epoxy powder coated
Beam TypeMedium Flood
(Wide Flood Available - Special Order)
Light source:  Type48 x white high power LEDs
Life100,000+ hours
Power59w 58w
Weight9.0kg (excluding cable)
Ingress protectionIP66/67
AccessoriesSupplied with bridle and lamp stand
All information has been gathered under laboratory conditions, the user must regard the values given as approximate
Changes may be made to the above specification without notification, details are available on request.
Rental Rate
S$55.00 / Day
(min rental period is 7 days)

Model: WF300SHM
CE Marked to ATEX directives and IECEx
Sealed dust tight & water immersion to IP67 Hi-powered LED white light up to 5200 lumens (58W) fitted with 20m cable and ATX plug
Weight excl cable 9.0kgs

Area of classification (Gas): Zones 1 & 2
Temp. classification (Gas): T4

Available in 100V-254V

Please contact us to rent this product.

Contact us today to enquire or purchase!
Call us at +65 6349 1930, or email us at to get in touch.