Special Features
- at least 3 hours of light in three selectable operating modes:
- Spot: Focussed, narrow and broad light beam
- Wide: Room illuminating light
- High beam: Widely radiating beam of light
- memory function (last setting is retained)
- corrosion-resistant charging pins (gold-plated spring steel)
- overcurrent, temperature and deep discharge protection
- compact design
Anywhere that flammable gases, vapours or dusts occur which mix with air or oxygen is at risk of explosion. This does not just relate to plants in the chemical industry and mining, but even bottling plants for high-percentage spirits or a grain silo can represent a potential source of explosion. Any unwanted explosion endangers the health and lives of anyone located nearby and is very likely to lead to serious material damage.
Where safety is an absolute must, GIFAS Ex products are used wherever there is a risk of explosion. Tested quality guaranteed.
The popular TorchLED work and inspection luminaire with emergency lighting function is now also available in an Ex-version. The luminaire is equipped with a rechargeable lithium polymer (LiPo) battery has to be charged outside the ex-zone. The TorchLED Ex fulfils the requirements of the Low Voltage Directive 2006 / 95 / EC, the Directive 2004 / 108 / EC concerning electromagnetic compatibility and the ATEX Directive 94 / 9 / EC.
Technical Data
Technical Data | ||
---|---|---|
TorchLED Ex | ||
Housing colour | black | |
Operating voltage | 6 VDC | |
Electric power supply | LiPo 7.4V-720mAh | |
Charging time | 6.5 h | |
Light duration factory settings (max. light power) | Spot (1 LED) | 6h |
Wide (1 LED) | 6h | |
Full light (2 LED) | 3h | |
Emergency light | 5h | |
Illuminant | 2 Power-LED à 1.6 W, cool white 5700 K | |
Protection category light | IP54 | |
Dimensions (W×L×H) | Light excl. charging station | 116×68×34 mm |
Light incl. charging station | 148×87×44 mm | |
Weight light | 165 g | |
ATEX certification number | KIWA 16ATEX0035X | |
Explosion-proof according to | EN 60079-02009 (general requirements) EN 60079-112012 (intrinsic safety) |
|
Zones | 1, 2, 21 and 22 | |
Permitted ambient temperature | –20°C < Ta < +45°C | |
Markinig | II 2 G Ex ib IIC T4 Gb II 2 D Ex ib IIIC T140°C Db |
|
Charging Station | ||
Protection category | IP44 | |
Protection class 230 VAC | II | |
Protection class 12 - 48 VDC | III | |
Dimensions (L×W×H) | 87×82×34 mm | |
Weight 12-48V/230V | 70g/80g | |
Permitted ambient temperature | 0° C to +40° C |
Product Range
Item no. | Description |
---|---|
860454 | TorchLED Ex torch light 6VDC, excl. charging station |
Accessories | |
860443 | TorchLED charging station 230 VAC, incl. 1,5 m cable and euro-plu |
860444 | TorchLED charging station 12-48 VDC, with 1,5 m cabl |